You are here: Home


SMD2835 240LEDS/M White 6000K DC24V IP20 Led Strip

Item No.: A2835-240-W-V24-NWP
2835 LED Strip,240LED/M,White Color ,6000K,CRI>80,22-26Lm,DC24V, 25W/M,IP20,UL CE Certification
Product parameters
LED Type: SMD2835
LED Brightness: 22-26Lm
LED Density: 240 leds/m
Description Package​​​​​​​ IP Grade Instruction Safety & Disclosures
SMD2835 240LED/M White 6000K IP20 LED Strip

1. SMD2835 LED Strip, CRI>80, SDCM<5
2. High luminous efficieny and color temperature consistency
3. Original 3M Brand tape, 2 OZ thick double layer PCB
4. 5 meters per roll packed in anti-static bag
5. Long life span 30,000 hours

  LED Type: SMD2835
LED Quantity: 240pcs LED/meter
Color: White 6000K
Brightness (each LED) 22-26Lm
Work Voltage: DC 24V
Max Power: 25W/M
PCB Size: L5000*W10mm
Minimum cut length: 25mm
IP Grade: IP20/IP54/IP65/IP67/IP68
Certification: UL CE ROHS
Warranty: 3 Years

Detail Display
Standard Packing Per Bag Standard Packing Per Outer Carton:
5 meters/reel,1 reel/anti-static bag
G.W. : Non-waterproof-0.13KG
25 bags to 1 inner box, size : 33.5x20x24cm
4 inner boxes to 1 outer carton size: 43x35.5x50.5cm
  • Install in accordance with the National Electric Code and local regulations.
  • This product is intended to be installed and serviced by a qualified, licensed electrician.
  • This product requires a compatible LED driver for proper configuration. Do not connect directly to high voltage 120~277V AC power.
  • It is generally recommended to load the driver no more than 70% the labeled rating for maximum performance and longevity. However, see each driver specification sheet for exact  maximum loading values.
  • Do not power tape light on the plastic spool or when tightly coiled. Excess heat may melt the spool and/or cause damage to the product.
  • Ensure applicable wire is installed between driver, fixture, and any controls in-between. When choosing wire, factor in voltage drop, amperage rating, and type (in-wall rated, wet location rated, etc.). Inadequate wire installation could overheat wires, and cause fire.
  • Attached wire leads or wire accessories are not rated for in-wall installation unless otherwise noted.
  • Strip light must be handled with care. Excessive handling, bending, and pressure may damage the product, voiding the warranty.
  • Ensure wire leads at opposing ends of the tape light are not crossed when the fixture is turned on. It is acceptable to modify the length or cut off the attached wire leads and DC connections in the field.
  • Actual color may vary from what is pictured on this sheet and other print materials due to the limitations of photographic processes.
  • Lighting technology has some amount of gradual light degradation (output and/or color) over the lifespan of the products. Diode LED products are designed to minimize degradation, but some light degradation and color shift is a normal part of the life span of any LED lighting  system.
  • We reserve the right to modify and improve the design of our fixtures without prior notice. We cannot guarantee to match existing installed fixtures for subsequent orders or replacements in regards to product appearance, CCT, or lumen output.